New High-Strength Steel Poses Challenges for Repair Time and Materials Costs

November 2, 2014, 10:33 am

≫ Next: Select the Right Orbit Size for the Best Results

≪ Previous: What’s Different about Aluminum Repair?

Company Media Contact Information

Media Contact Name:

Deborah Robinson

Media Contact E-Mail:

drobinson@vmg1.com

Media Contact Phone:

312-505-4336

Company:

Booth #:

12343

Steel Yourself for Changes

New High-Strength Steel Poses Challenges for Repair Time and Materials Costs

Technical Tips from Branden Loesch, 3M Automotive Aftermarket Technical Service Engineer

LAS VEGAS, NV (November 4, 2014) – The collision repair industry is seeing more vehicles with high-strength steel, posing some new challenges for technicians. As OEMs push to meet future CAFÉ standards, they are looking to new alternative body materials that provide greater strength to meet crash and rollover standards, while also allowing them to lighten the vehicle to reach the 54.5 MPG goal for 2025. The change in part composition is sure to impact your shop’s repair time and materials cost. What actions can you take today to improve your processes for tomorrow?

Press Gallery Information

↧

Select the Right Orbit Size for the Best Results

November 2, 2014, 10:38 am

≫ Next: When It Comes to Compounding, Size Drives the Preferred Process 3M Offers Perfect Solutions for Small, Medium and Large Paint Finishing Jobs

≪ Previous: New High-Strength Steel Poses Challenges for Repair Time and Materials Costs

Company Media Contact Information

Media Contact Name:

Deborah Robinson

Media Contact E-Mail:

drobinson@vmg1.com

Media Contact Phone:

312-505-4336

Company:

Booth #:

12343

Select the Right Orbit Size for the Best Results

Large Orbit Tools Can Significantly Impact Your
Abrasive Cut Performance and Increase Production in the Shop.

Technical Tips from Adam Spah, 3M Automotive Aftermarket Technical Expert

LAS VEGAS, NV (November 4, 2014) – There is often a perception in the auto body industry that the sander of choice is dependent upon what part of the shop it is used in. In some cases this is true, but there is much more to consider. In the past, tool companies have touted the orbit of a dual action sander by “coarse throw” and “fine throw.” This has given the industry a false sense of what the orbit does to the performance of an abrasive disc.

The assumption has been that coarse throw or large orbit tools are used with coarse grade abrasives, while fine throw or small orbit tools are used with fine grade abrasives. With further investigation and testing, this has shown to be a false way to look at sanders and applications.

Press Gallery Information

↧

When It Comes to Compounding, Size Drives the Preferred Process 3M Offers Perfect Solutions for Small, Medium and Large Paint Finishing Jobs

November 2, 2014, 10:41 am

≫ Next: Solar Gard: Delivering More Per-Vehicle Profit at SEMA 2014

≪ Previous: Select the Right Orbit Size for the Best Results

Company Media Contact Information

Media Contact Name:

Deborah Robinson

Media Contact E-Mail:

drobinson@vmg1.com

Media Contact Phone:

312-505-4336

Company:

Booth #:

12343

When It Comes to Compounding, Size Drives the Preferred Process

3M Offers Perfect Solutions for Small, Medium and Large Paint Finishing Jobs

3M Paint Finishing Experts Provide Tips on Choosing the Right System for the Project

ST. PAUL, Minn. (November 4, 2014) – When it comes to paint refinishing, compounding is the most debated step in the process. For paint professionals, 3M Automotive Aftermarket Division offers two excellent systems – one with a compounding step and one without. But how can you tell which process is right for your paint finishing job?

The 3M paint finishing experts say size matters when selecting the best process to deliver high-quality results, as does the color of the vehicle.

Press Gallery Information

↧

Solar Gard: Delivering More Per-Vehicle Profit at SEMA 2014

November 3, 2014, 7:08 am

≫ Next: ODYSSEY® Battery to Present Check to the 2014 Red Bull Global Rallycross Extreme ODYSSEY® Performer Award Winner

≪ Previous: When It Comes to Compounding, Size Drives the Preferred Process 3M Offers Perfect Solutions for Small, Medium and Large Paint Finishing Jobs

Company Media Contact Information

Media Contact Name:

Bill Trifiro

Media Contact E-Mail:

bill@trisvara.com

Media Contact Phone:

617-413-8653

Company:

TriSvara

Booth #:

#12965 & #13061

With next-generation paint protection film (PPF) and industry-leading window film solutions, Solar Gard has you covered from SEMA 2014 @ Booths #12965 & #13061

Las Vegas, NV - Solar Gard®, a company of Saint-Gobain, a global leader in the development, manufacturing and distribution of specialty films, is pleased to announce displays and demonstrations with two booths (#12965 and #13061) at the 2014 SEMA Show in Las Vegas, Nov 4-7. A key product focus at the booths will be Solar Gard’s invisible paint protection film, Clearshield Pro®, which keeps a customer’s entire vehicle looking as good as the day it was applied – while also boosting per-vehicle profits.

Press Gallery Information

↧

ODYSSEY® Battery to Present Check to the 2014 Red Bull Global Rallycross Extreme ODYSSEY® Performer Award Winner

November 3, 2014, 8:10 am

≫ Next: RHINO LININGS CORPORATION, DOETSCH OFF-ROAD TO UNVEIL TRAIL REAPER AT SEMA

≪ Previous: Solar Gard: Delivering More Per-Vehicle Profit at SEMA 2014

Company Media Contact Information

Media Contact Name:

Nicole Materia

Media Contact E-Mail:

nicoleg@hbmadv.com

Media Contact Phone:

2154409800

Company:

Harris Baio & McCullough

Booth #:

24875

READING, Pa. (Oct. 31, 2014) – ODYSSEY® battery by EnerSys®, an official battery of Red Bull Global Rallycross (Red Bull GRC), has announced that it will present a bonus check to the winner of the 2014 Extreme ODYSSEY® Performer Award following the final circuit event of the season in Las Vegas on Wednesday, Nov. 5.

The big reward is the final part of a contingency award program developed earlier this year, in which the top three finishing drivers at each race who meet eligibility requirements receive a cash bonus and points award. The driver with the most points at the end of the season receives an additional bonus. A representative from ODYSSEY® battery will present the bonus check to the winner during the post-race trophy presentation on Nov 5.

Press Gallery Information

↧

RHINO LININGS CORPORATION, DOETSCH OFF-ROAD TO UNVEIL TRAIL REAPER AT SEMA

November 3, 2014, 8:56 am

≫ Next: Meet the hosts of Velocity TV’s Car Fix, Jared Zimmerman and Lou Santiago and see their recently rebuilt ’71 Camaro that was created for the STA-BIL 360° Custom Car Sweepstakes at the STA-BIL Booth #21551

≪ Previous: ODYSSEY® Battery to Present Check to the 2014 Red Bull Global Rallycross Extreme ODYSSEY® Performer Award Winner

Company Media Contact Information

Media Contact Name:

Jennifer Villalobos

Media Contact E-Mail:

jvillalobos@rhinolinings.com

Media Contact Phone:

8584500441

Company:

Rhino Linings Corporation

Booth #:

33037

Rhino Linings Run My Build Trail ReaperSan Diego, Calif. (Nov. 3, 2014)—Doetsch Off-Road is working to finish the fan-designed custom Jeep® known as Trail Reaper in time to unveil it at the Rhino Linings booth during the 2014 Specialty Equipment Market Association Show in Las Vegas.

In June Rhino Linings and Doetsch asked fans to “Run My Build,” and more than 8,400 fans voted online on their favorite theme, color, graphics and aftermarket accessories for the Jeep Wrangler JK. Since then, Doetsch Off-Road, a three-time SEMA “Best Build” award winner, has been working to turn the fans’ dreams into reality.

Some of the biggest names in the industry have been involved in this build including Rhino Linings, Doetsch Shocks, Bushwacker, TIS Wheels, Truck-Lite, TeraFlex, JcrOffroad, Rigid Industries, DayStar, Katzkin Automotive Leather, Rugged Ridge, Gibson Performance, Interco Tires, Warn, Airaid, Active Grafix and Gearshade.

Press Gallery Information

rhino_linings_trail_reeper_jeep.jpg

↧

Meet the hosts of Velocity TV’s Car Fix, Jared Zimmerman and Lou Santiago and see their recently rebuilt ’71 Camaro that was created for the STA-BIL 360° Custom Car Sweepstakes at the STA-BIL Booth #21551

November 3, 2014, 9:48 am

≫ Next: CHARIOTZ Launches The World’s First Online Hub For Automotive Customization And Restoration - CHARIOTZ makes auto customization and restoration easy and fun through a new photo-based storytelling platform for businesses and car lovers.

≪ Previous: RHINO LININGS CORPORATION, DOETSCH OFF-ROAD TO UNVEIL TRAIL REAPER AT SEMA

Company Media Contact Information

Media Contact Name:

Bruce Kaufman

Media Contact E-Mail:

bkaufman@goldeagle.com

Media Contact Phone:

847-989-3705

Company:

Gold Eagle Company

Booth #:

21551

Come meet the super popular hosts behind Velocity TV’s Car Fix, Jared Zimmerman and Lou Santiago, as they greet fans, sign autographs and show off their recently rebuilt ’71 Camaro that was created for the STA-BIL 360° Custom Car Sweepstakes.

After months of blood, sweat and tears, the keys to the beautifully rebuilt Camaro will officially be handed over to the lucky winner whose entry was among the 1.2 million received during the contest. The STA-BIL 360° Custom Car Sweepstakes giveaway presentation will take place:

Wednesday, November 5 from 11-12 pm at STA-BIL booth #21551

Additionally, Jared Zimmerman and Lou Santiago will be available to greet fans and sign autographs:

Tuesday, November 4 from 10-11 am & 2-3 pm
Wednesday, November 5 from 10-11 am
STA-BIL booth #21551

To arrange interview or for more information, contact Bruce Kaufman at bkaufman@goldeagle.com or 847-989-3705.

Press Gallery Information

car_fix_2.jpg

↧

CHARIOTZ Launches The World’s First Online Hub For Automotive Customization And Restoration - CHARIOTZ makes auto customization and restoration easy and fun through a new photo-based storytelling platform for businesses and car lovers.

November 3, 2014, 6:21 pm

≫ Next: ISIS POWER TO GO TO MARKET AS INFINITYBOX LLC AS OF SEMA

≪ Previous: Meet the hosts of Velocity TV’s Car Fix, Jared Zimmerman and Lou Santiago and see their recently rebuilt ’71 Camaro that was created for the STA-BIL 360° Custom Car Sweepstakes at the STA-BIL Booth #21551

Company Media Contact Information

Media Contact Name:

Wilfred Martis

Media Contact E-Mail:

wilf@chariotz.com

Media Contact Phone:

6508142852

Company:

Chariotz Labz LLC

Booth #:

33283

CHARIOTZ announced the launch of its new site, CHARIOTZ.com. CHARIOTZ provides a new way for auto customization and restoration businesses, and car enthusiasts, to easily tell the stories behind their modified and restored cars using photos and highly informative tags. Consumers use the site to show off their custom and classic cars, get inspired by thousands of showcased cars, discover new ideas, and get modification and restoration information. Businesses use the site to showcase their products and projects, and find customers who are looking for help to turn their own ideas into reality.

Press Gallery Information

chariotzdotcom.png

↧

ISIS POWER TO GO TO MARKET AS INFINITYBOX LLC AS OF SEMA

November 3, 2014, 7:54 pm

≫ Next: Custom Built 2 + 2 by Thoroughbred for fun or racing

≪ Previous: CHARIOTZ Launches The World’s First Online Hub For Automotive Customization And Restoration - CHARIOTZ makes auto customization and restoration easy and fun through a new photo-based storytelling platform for businesses and car lovers.

Company Media Contact Information

Media Contact Name:

Jay Harris

Media Contact E-Mail:

jharris@infinitybox.com

Media Contact Phone:

708 822-9959

Company:

Infinitybox, LLC

Booth #:

33221

ISIS POWER TO GO TO MARKET AS INFINITYBOX LLC AS OF SEMA; DEBUTS EXPRESS RACING KITS

Innovator of electrical wiring systems for vehicles to feature brand new Panoz Esperante 25th anniversary edition of the Spyder at SEMA booth 33221 November 4 through 7.

Chicago, Illinois, November 3, 2014—ISIS Power, a leading designer and manufacturer of electrical wiring systems for cars, trucks and custom vehicles, will go to market as INFINITYBOX LLC. The name change takes place as the company prepares to exhibit at SEMA, the world’s premier automotive specialty products trade event, from November 4 through 7 in Las Vegas, Nevada.

At the show, INFINITYBOX will introduce its INFINITYWIRE brand of wiring and electronics products for hot rods, street rods, pro touring, kit cars and racing.

Press Gallery Information

infinity_box_logo.jpg

↧

Custom Built 2 + 2 by Thoroughbred for fun or racing

November 4, 2014, 5:31 am

≫ Next: HushMat Sound Deadening & Thermal Insulation material in Chop Cut Rebuild 1967 Chevelle and 1953 F-100 projects – Debut at SEMA 2014

≪ Previous: ISIS POWER TO GO TO MARKET AS INFINITYBOX LLC AS OF SEMA

Company Media Contact Information

Media Contact Name:

Harry Evans

Media Contact E-Mail:

harry@buckeyeresto.com

Media Contact Phone:

(724) 650-4259 or (330) 502-6283

Company:

Thoroughbred

Booth #:

24793

Las Vegas, Nevada
For Immediate Release 11/03/2014
Canfield, Ohio’s Thoroughbred International at SEMA through 11/8/14
Thoroughbred International and well-known Ford Mustang concours restoration shop, Buckeye Classic Car Restoration, have built the first all-new, all-steel 1965 Fastback in 50 years. The car was built in the USA from the ground up, starting with a Thoroughbred Skeleton as the foundation, which combined with the Anthony Jones Engineering Suspension front and rear gives the car the chassis to behave like a modern car. Dubbed Project Undercover, this 2+2 street and track car took just under five months to complete. It looks as well as it handles with the 2015 Mustang color Race Red.
The car is on display at the Golden Star Auto booth, number 23795, for the duration of the SEMA show.

Press Gallery Information

nates_handmade_car.jpg

↧

HushMat Sound Deadening & Thermal Insulation material in Chop Cut Rebuild 1967 Chevelle and 1953 F-100 projects – Debut at SEMA 2014

November 4, 2014, 7:30 am

≫ Next: Terry McMillan, NHRA Top Fuel Driver, at Clean Seal, Inc.'s booth #23974

≪ Previous: Custom Built 2 + 2 by Thoroughbred for fun or racing

Company Media Contact Information

Media Contact Name:

Timothy McCarthy

Media Contact E-Mail:

tmac@hushmat.com

Media Contact Phone:

816-210-6944

Company:

HushMat

Booth #:

22985

FOR IMMEDIATE RELEASE
CONTACT:
TIM McCARTHY
(913) 599-2600

HushMat Sound Deadening & Thermal Insulation material in Chop Cut Rebuild 1967 Chevelle and 1953 F-100 projects – Debut at SEMA 2014

Olathe, Kansas November 4, 2014 HushMat® – The solution for Heat & Noise.
HushMat was unveiled as a Key Supplier Partner on the Chop Cut Rebuild (MAV TV) 1967 Chevrolet Chevelle and Ford F100 at SEMA 2014. Chop Cut Rebuild host for 10 seasons running Dan Woods demonstrated the unrivaled performance of HushMat.

Press Gallery Information

hushmat_ccr_release_11-4-2014.jpg

↧

Terry McMillan, NHRA Top Fuel Driver, at Clean Seal, Inc.'s booth #23974

November 4, 2014, 1:10 pm

≫ Next: HushMat 2015 Data Available at SEMA Data Co-Op

≪ Previous: HushMat Sound Deadening & Thermal Insulation material in Chop Cut Rebuild 1967 Chevelle and 1953 F-100 projects – Debut at SEMA 2014

Company Media Contact Information

Media Contact Name:

Mitch Hollar

Media Contact E-Mail:

mitch@t3marketing.com

Media Contact Phone:

574-221-1944

Company:

Clean Seal, Inc.

Booth #:

23974

Terry McMillen to sign autographs at Clean Seal, Inc.'s booth tomorrow, Wednesday the 5th of November from 1pm-3pm. Please stop by and say hello to Terry and meet one of the sports great guys. And be sure to check out all of the products Clean Seal, Inc. has to offer.

Press Gallery Information

terrymcmillen.jpg

↧

HushMat 2015 Data Available at SEMA Data Co-Op

November 5, 2014, 9:21 am

≫ Next: Local Motors Announces 3D-printed Car Modification Competition | ModMen Challenge to award 3D-printed cars to 12 winning entries

≪ Previous: Terry McMillan, NHRA Top Fuel Driver, at Clean Seal, Inc.'s booth #23974

Company Media Contact Information

Media Contact Name:

Timothy McCarthy

Media Contact E-Mail:

tmac@hushmat.com

Media Contact Phone:

816-210-6944

Company:

HushMat

Booth #:

22985

FOR IMMEDIATE RELEASE
CONTACT:
TIM McCARTHY
(913) 599-2600

Olathe, Kansas November 5, 2013 HushMat® HushMat ‘s 2015 Data is available now for download from the SEMA Data Coop. HushMat, the fastest growing automotive sound deadening and thermal insulation materials Company, continues gain market share across the entire United States. Automotive, Marine and Car Audio accounts will benefit tremendously from this relationship.

HushMat®, rated #1 automotive sound deadening and thermal insulation material, is the easiest to install, highest performing available to automotive enthusiasts. HushMat® Ultra, is easily applied to sheet metal, plastic or fiberglass surface surrounding the interior of the vehicle reducing interior noise and heat making the vehicle ride more comfortable. HushMat® is the only aftermarket sound deadening and thermal insulation material made in the USA!

Press Gallery Information

↧

Local Motors Announces 3D-printed Car Modification Competition | ModMen Challenge to award 3D-printed cars to 12 winning entries

November 5, 2014, 10:38 am

≫ Next: HushMat offers over 2,000 Year, Make & Model, Custom Vehicle Kits!!

≪ Previous: HushMat 2015 Data Available at SEMA Data Co-Op

Company Media Contact Information

Media Contact Name:

Kate Hartley

Media Contact E-Mail:

khartley@local-motors.com

Media Contact Phone:

480-717-0624

Company:

Local Motors

Booth #:

20579

Las Vegas, Nev. (November 05, 2014) – Local Motors today announces the ModMen Challenge, a bold competition that asks the hot rod and motor vehicle aftermarket community to “hack up” and modify a 3D-printed vehicle, just like they would any other car. The contest starts online, where participants submit design modification proposals designed for and built on the same 3D-printed car model. After an online voting round, 12 “ModMen” winners will be awarded a real 3D-printed vehicle on which to bring their winning designs to life. The ModMen Challenge culminates at SEMA 2015, where all 12 of the modified cars will be presented and judged, with one vehicle emerging victorious as the grand prize winner and title of ultimate “ModMan.”

Press Gallery Information

modmen-instagram-01.jpg

↧

HushMat offers over 2,000 Year, Make & Model, Custom Vehicle Kits!!

November 6, 2014, 8:43 am

≫ Next: WELD Directs Engineering Expertise to Key Customer Segments

≪ Previous: Local Motors Announces 3D-printed Car Modification Competition | ModMen Challenge to award 3D-printed cars to 12 winning entries

Company Media Contact Information

Media Contact Name:

Timothy McCarthy

Media Contact E-Mail:

tmac@hushmat.com

Media Contact Phone:

816-210-6944

Company:

HushMat

Booth #:

22985

FOR IMMEDIATE RELEASE
CONTACT:
TIM McCARTHY
(913) 599-2600

HushMat offers over 2,000 Year, Make & Model, Custom Vehicle Kits!!

Olathe, Kansas November 6, 2014 HushMat® – HushMat leads the industry in Year make & model custom vehicle kits.

HushMat exceeded over 2000 Year, Make & Model Custom Vehicle Kits for the automotive wholesale, retail and Do It Yourself “DIY” market. Our Custom Vehicle Kits make ordering and using the HushMat product for their specific make/model/year car or truck simple, fast & effective. HushMat, the fastest growing automotive sound deadening and thermal insulations Materials Company, continued to lead the market with the #1 rated material technology and products that everyone can use.

Press Gallery Information

custom_vehicle_kit_1969_camaro.jpg

↧

WELD Directs Engineering Expertise to Key Customer Segments

November 6, 2014, 4:20 pm

≫ Next: At inaugural SEMA showing, newcomer Wipe New earns 3 prestigious 2014 Global Media Awards for trailblazing new products Wipe New® Headlight Restore & Wipe New® Wheels

≪ Previous: HushMat offers over 2,000 Year, Make & Model, Custom Vehicle Kits!!

Company Media Contact Information

Media Contact Name:

Leslie Allen

Media Contact E-Mail:

lallen@themarxgrp.com

Media Contact Phone:

615-429-7965

Company:

The Marx Group

Booth #:

24957

Kansas City, Mo. – WELD, manufacturers of WELD wheels, announced today at SEMA 2014 their strategy to apply WELD’s race-winning heritage and expertise to all segments of the high performance wheel market. WELD will speak directly to the different consumers in each market segment through its four brands: WELD Racing, WELD Street & Strip, REKON Off Road by WELD and CCW Forged Performance. This new structure will better connect with customers and clarify each brand’s target market, allowing for more powerful messaging for each type of buyer, and more targeted high performance forged wheels.

“As WELD has experienced unprecedented growth, we’ve increasingly seen the need to make our brand positioning very clear to the marketplace,” said Norman Young, president and CEO, WELD. “This new structure defines who are as a company, and gives us a platform to further expand and grow as a company. We are very excited to make this announcement today at one of the aftermarket’s premier events.”

Press Gallery Information

branding_cmyk.jpg

↧

At inaugural SEMA showing, newcomer Wipe New earns 3 prestigious 2014 Global Media Awards for trailblazing new products Wipe New® Headlight Restore & Wipe New® Wheels

November 21, 2014, 12:32 pm

≫ Next: Through trial by fire, Dinjee Glo Rails is proving that 3D Printing can make a usable, reliable automotive product out of ABS Plastic; despite certain limitations!!

≪ Previous: WELD Directs Engineering Expertise to Key Customer Segments

Company Media Contact Information

Media Contact Name:

Nick Naylor

Media Contact E-Mail:

admin@wipenew.com

Media Contact Phone:

7574636653

Company:

Wipe New

Booth #:

12355

FOR IMMEDIATE RELEASE

Press Gallery Information

↧

Through trial by fire, Dinjee Glo Rails is proving that 3D Printing can make a usable, reliable automotive product out of ABS Plastic; despite certain limitations!!

January 28, 2015, 5:11 pm

≫ Next: When It Comes to Compounding, Size Drives the Preferred Process 3M Offers Perfect Solutions for Small, Medium and Large Paint Finishing Jobs

≪ Previous: At inaugural SEMA showing, newcomer Wipe New earns 3 prestigious 2014 Global Media Awards for trailblazing new products Wipe New® Headlight Restore & Wipe New® Wheels

Company Media Contact Information

Media Contact Name:

Bryan Hickman

Media Contact E-Mail:

info@dinjee.com

Media Contact Phone:

936-242-3144

Company:

Dinjee Systems LLC

Booth #:

8330

Trial by fire, you ask? Please sit back and enjoy hearing how we feel confident in saying this. We feel certain these few paragraphs will help everyone who has been or just beginning to show interest in what all 3D printing entails, to further understand the methods used to create our automotive product and also, what a finished product can endure. Hopefully a wry smile might follow as well...so let us begin with just two words...monster trucks...cue wry smile...

Press Gallery Information

dscn0949.jpg

10888474_1513208268956424_4724364100882566890_n.jpg

↧

When It Comes to Compounding, Size Drives the Preferred Process 3M Offers Perfect Solutions for Small, Medium and Large Paint Finishing Jobs

November 2, 2014, 10:41 am

≫ Next: Introducing Lead-Free Solder Terminals & Connectors

≪ Previous: Through trial by fire, Dinjee Glo Rails is proving that 3D Printing can make a usable, reliable automotive product out of ABS Plastic; despite certain limitations!!

Company Media Contact Information

Media Contact Name:

Deborah Robinson

Media Contact E-Mail:

drobinson@vmg1.com

Media Contact Phone:

312-505-4336

Company:

Booth #:

12343

When It Comes to Compounding, Size Drives the Preferred Process

3M Offers Perfect Solutions for Small, Medium and Large Paint Finishing Jobs

3M Paint Finishing Experts Provide Tips on Choosing the Right System for the Project

The 3M paint finishing experts say size matters when selecting the best process to deliver high-quality results, as does the color of the vehicle.

Press Gallery Information

↧

Introducing Lead-Free Solder Terminals & Connectors

July 28, 2015, 11:41 am

≫ Next: MBM Brakes Releases NEW 2nd Gen Camaro/Firebird Booster Conversion Kit

≪ Previous: When It Comes to Compounding, Size Drives the Preferred Process 3M Offers Perfect Solutions for Small, Medium and Large Paint Finishing Jobs

Company Media Contact Information

Media Contact Name:

Caitlin McNally

Media Contact E-Mail:

caitlin.mcnally@delcity.net

Media Contact Phone:

262-293-0578

Company:

Del City

Booth #:

23875

FOR IMMEDIATE RELEASE

Contact: Caitlin McNally, Del City
262-293-0578
caitlin.mcnally@delcity.net

Introducing Lead-Free Solder Terminals & Connectors

MENOMONEE FALLS, Wis., July 28, 2015 – Del City announces the addition of the new and improved Lead-Free Solder Terminals and Connectors to its product line, coming fall 2015. This innovative addition to the product line will be offered in Shrink Tube & Solder and Shrink Tube, Crimp & Solder varieties. The advantages of Lead-Free Solder include no hazardous materials (RoHS compliant), lower melt temperature (138°C vs 145°C), and greater surface tension. The improved surface tension allows the solder stays in place, providing greater tensile strength and a cleaner installation, as solder is less likely to run out of the tubing.

Press Gallery Information

mlf_lead_free.jpg

↧

Latest Images